|
|
Step 2 of 5: Selecting Sensor CHARACTERISTC:
|
Below you will find several different versions of our Speed Switches. There are 3 sensing types, and 3 different configurations.
The first 3 parts that start with code SSR have a form C relay output.
The next 3 parts with the code SSP have an adjustment pot that allow the Trip Frequency to be field adjusted.
The last 3 parts that start with code SST are a line of lower cost, smaller transistor output Speed Switches.
Within these 3 configurations, we offer different models for different targets.
The parts with code EHS1 detect magnets, multi-pole ring magnets, our Shaft Collars, or our Multi-Pole Magnetic Tape.
The parts with code DS detect gear teeth
The parts with code DSO detect other ferrous targets, like bolt heads, holes in a steel plate, a flat on a shaft, etc.
Click Drawing to Continue ------>
CHOICE 1
|
Speed Switch, Relay Output-Magnet Target, Either Pole Hall Switch, 38 G
|
- HALL EFFECT SPEED SWITCH WITH RELAY OUTPUT
- ACTIVATED WITH MULTI-POLE MAGNETIC TAPE, RAW MAGNETS, OR SHAFT COLLAR MAGNETS
- OVERSPEED, UNDERSPEED, AND ZERO SPEED CONDITIONS
- NORMALLY OPEN OR CLOSED RELAY OUTPUT OPTIONS
- ROTATIONAL AND LINEAR SPEED MEASUREMENT APPLICATIONS
- ZERO SPEED OUTPUT NOT AFFECTED BY TARGET POSITION
- CLICK PICTURE TO SEE OPTIONS
|
|
Click Drawing to Continue ------>
CHOICE 2
|
Speed Switch, Relay Output-Gear Target, 25G hysteresis
|
- GEAR TOOTH SPEED SWITCH WITH RELAY OUTPUT
- ACTIVATED WITH FERROUS GEARS OR LINEAR RACKS 4-32 PITCH
- OVERSPEED, UNDERSPEED, AND ZERO SPEED CONDITIONS
- NORMALLY OPEN OR CLOSED RELAY OUTPUT OPTIONS
- WORKS IN ROTATIONAL AND LINEAR SPEED MEASUREMENT APPLICATIONS
- ZERO SPEED OUTPUT NOT AFFECTED BY GEAR TOOTH POSITION
- CLICK PICTURE TO SEE OPTIONS
|
|
Click Drawing to Continue ------>
CHOICE 3
|
Speed Switch, Relay Output-Ferrous Target, Non-oriented
|
- FERROUS TARGET SPEED SWITCH WITH RELAY OUTPUT
- ACTIVATED WITH BOLT HEADS, HOLES IN FERROUS TARGETS, AND OTHER FERROUS FEATURES
- NORMALLY OPEN OR CLOSED RELAY OUTPUT OPTIONS
- WORKS IN ROTATIONAL AND LINEAR SPEED MEASUREMENT APPLICATIONS
- ZERO SPEED OUTPUT NOT AFFECTED BY GEAR TOOTH POSITION
- CLICK PICTURE TO SEE OPTIONS
|
|
Click Drawing to Continue ------>
CHOICE 4
|
Speed Switch, Field Adjustable-Magnet Target, Either Pole Hall Switch, 38 G
|
- HALL EFFECT SPEED SWITCH WITH USER ADJUSTABLE TRIP POINT
- ACTIVATED WITH MULTI-POLE MAGNETIC TAPE, RAW MAGNETS, OR SHAFT COLLAR MAGNETS
- OVERSPEED, UNDERSPEED, AND ZERO SPEED CONDITIONS
- 5V & 8-30V POWER OPTIONS WITH NPN AND TTL OUTPUT OPTIONS
- ROTATIONAL AND LINEAR SPEED MEASUREMENT APPLICATIONS
- ZERO SPEED OUTPUT NOT AFFECTED BY TARGET POSITION
- CLICK PICTURE TO SEE OPTIONS
|
|
Click Drawing to Continue ------>
CHOICE 5
|
Speed Switch, Field Adjustable-Gear Target, 25G hysteresis
|
- GEAR TOOTH SPEED SWITCH WITH USER ADJUSTABLE TRIP POINT
- ACTIVATED WITH FERROUS GEARS OR LINEAR RACKS 4-32 PITCH
- OVERSPEED, UNDERSPEED, AND ZERO SPEED CONDITIONS
- 5V & 8-30V POWER OPTIONS WITH NPN AND TTL OUTPUT OPTIONS
- WORKS IN ROTATIONAL AND LINEAR SPEED MEASUREMENT APPLICATIONS
- ZERO SPEED OUTPUT NOT AFFECTED BY GEAR TOOTH POSITION
- CLICK PICTURE TO SEE OPTIONS
|
|
Click Drawing to Continue ------>
CHOICE 6
|
Speed Switch, Field Adjustable-Ferrous Target, Non-oriented
|
- FERROUS TARGET SPEED SWITCH WITH USER ADJUSTABLE TRIP POINT
- ACTIVATED WITH BOLT HEADS, HOLES IN FERROUS TARGETS, AND OTHER FERROUS FEATURES
- 5V & 8-30V POWER OPTIONS WITH NPN AND TTL OUTPUT OPTIONS
- WORKS IN ROTATIONAL AND LINEAR SPEED MEASUREMENT APPLICATIONS
- ZERO SPEED OUTPUT NOT AFFECTED BY GEAR TOOTH POSITION
- CLICK PICTURE TO SEE OPTIONS
|
|
Click Drawing to Continue ------>
CHOICE 7
|
Speed Switch, Transistor Output-Magnet Target, Either Pole Hall Switch, 38 G
|
- LOWEST COST HALL EFFECT SPEED SWITCH
- ACTIVATED WITH MULTI-POLE MAGNETIC TAPE, RAW MAGNETS, OR SHAFT COLLAR MAGNETS
- OVERSPEED, UNDERSPEED, AND ZERO SPEED CONDITIONS
- 5V & 8-30V POWER OPTIONS WITH NPN AND TTL OUTPUT OPTIONS
- ROTATIONAL AND LINEAR SPEED MEASUREMENT APPLICATIONS
- ZERO SPEED OUTPUT NOT AFFECTED BY TARGET POSITION
- CLICK PICTURE TO SEE OPTIONS
|
|
Click Drawing to Continue ------>
CHOICE 8
|
Speed Switch, Transistor Output-Gear Target, 25G hysteresis
|
- LOWEST COST GEAR TOOTH SPEED SWITCH
- ACTIVATED WITH FERROUS GEARS OR LINEAR RACKS 4-32 PITCH
- OVERSPEED, UNDERSPEED, AND ZERO SPEED CONDITIONS
- 5V & 8-30V POWER OPTIONS WITH NPN AND TTL OUTPUT OPTIONS
- WORKS IN ROTATIONAL AND LINEAR SPEED MEASUREMENT APPLICATIONS
- ZERO SPEED OUTPUT NOT AFFECTED BY GEAR TOOTH POSITION
- CLICK PICTURE TO SEE OPTIONS
|
|
Click Drawing to Continue ------>
CHOICE 9
|
Speed Switch, Transistor Output-Ferrous Target, Non-oriented
|
- LOWEST COST FERROUS TARGET SPEED SWITCH
- ACTIVATED WITH BOLT HEADS, HOLES IN FERROUS TARGETS, AND OTHER FERROUS FEATURES
- 5V & 8-30V POWER OPTIONS WITH NPN AND TTL OUTPUT OPTIONS
- WORKS IN ROTATIONAL AND LINEAR SPEED MEASUREMENT APPLICATIONS
- ZERO SPEED OUTPUT NOT AFFECTED BY GEAR TOOTH POSITION
- CLICK PICTURE TO SEE OPTIONS
|
|
|
