Sensor Selection Wizard, Step 3 of 5: Sensor Solutions available sensor electrical options for magnetic field sensors

	Home \| Products \| Keyword Converter Search \| Cross Reference & Part # Search \| About Us \| FAQ \| Contact Us

Step 3 of 5: Selecting Sensor OPTION:

<1 TYPE> <2 CHARACTERISTIC> <3 OPTION><4 HOUSING> <5 CONNECTION>
You Are Here : Products > Sensors > Quadrature (2 Channel) Gear Tooth Sensor> DQ Quadrature (2 Channel) Gear Tooth Sensor> OPTION

OPTION lets you choose from the different electrical attributes. Examples are NPN output, PNP output, with internal pull up resistor, with internal voltage regulator etc. Compare the bullets and click the drawing of your best choice.

Click Drawing to Continue ------->

CHOICE 1

npn 5k pull up resistor

Click here to select a self calibrating quadrature speed sensor with a npn output and an internal 5k pull up (most common choice)

NPN TRANSISTOR WITH 5K PULL UP RESISTOR
TYPICALLY THESE OPERATE FROM 4.5 TO 24V
PRODUCES 0 TO Vcc OUTPUT PULSES
THIS IS THE MOST COMMONLY USED OPTION
SINKS MORE CURRENT THAN IT SOURCES

Pricing Option	Code	10 pcs $each	100 pcs $each	1000 pcs $each
Option	5K	64.75	27.80	14.59
Housing
Connection
Sub Total		64.75	27.80	14.59
Total Cost		-	-	-

Click Drawing to Continue ------->

CHOICE 2

N channel open drain output

Click here to select a self calibrating quadrature speed sensor with a npn open drain output

N CHANNEL COMS WITH OPEN DRAIN
TYPICALLY THESE OPERATE FROM 4.5 TO 24V
SINKS CURRENT TO GROUND ONLY
DOES NOT SOURCE CURRENT
LOAD MUST BE CONNECTED TO A POSITIVE VOLTAGE
USE THIS OPTION TO SAVE POWER

Pricing Option	Code	10 pcs $each	100 pcs $each	1000 pcs $each
Option	OD	57.63	25.69	13.98
Housing
Connection
Sub Total		57.63	25.69	13.98
Total Cost		-	-	-

Click Drawing to Continue ------->

CHOICE 3

regulated input, 0-5V TTL output

Click here to select a self calibrating quadrature speed sensor with a regulated input and a 0-5V TTL output

NPN TRANSISTOR RESISTOR TO REGULATED 5 VOLTS
RUNS FROM ANY DC SUPPLY VOLTAGE 8 TO 30V
PRODUCES 0 TO 5V PULSES
SOURCES 5V THROUGH A 499 OHM RESISTOR
SINKS AT LEAST 20mA (SEE SPEC SHEET)
CONTINUE SELECTING TO SPEC SHEET FOR DETAILS

Pricing Option	Code	10 pcs $each	100 pcs $each	1000 pcs $each
Option	RT	72.51	31.50	15.91
Housing
Connection
Sub Total		72.51	31.50	15.91
Total Cost		-	-	-

Click Drawing to Continue ------->

CHOICE 4

5V operation RS422 line driver

Click here to select a self calibrating quadrature speed sensor with a 5V input and a RS422 line driver

RUNS FROM 5V POWER SUPPLY
RS422 DRIVER OUTPUT
NOISE CANCELLATION FROM COMPLIMENTARY OUTPUTS
COMPATIBLE WITH EXISTING SHAFT ENCODER INPUTS

Pricing Option	Code	10 pcs $each	100 pcs $each	1000 pcs $each
Option	D5	78.36	37.21	17.81
Housing
Connection
Sub Total		78.36	37.21	17.81
Total Cost		-	-	-

Click Drawing to Continue ------->

CHOICE 5

Regulated input RS422 line driver

Click here to select a self calibrating quadrature speed sensor with a regulated input and a RS422 line driver

RUNS FROM ANY DC SUPPLY VOLTAGE 8 TO 16V (24-30V available)
RS422 DRIVER OUTPUT
NOISE CANCELLATION FROM COMPLIMENTARY OUTPUTS
COMPATIBLE WITH EXISTING SHAFT ENCODER INPUTS

Pricing Option	Code	10 pcs $each	100 pcs $each	1000 pcs $each
Option	DR	80.51	38.17	18.23
Housing
Connection
Sub Total		80.51	38.17	18.23
Total Cost		-	-	-

Display All Options.

Home -- About Us -- Sensor Selection Wizard -- Products -- Contact Us -- FAQ

Phone: 970 879-9900 Email Sales	Sensor Solutions Corp 2670 Copper Ridge Circle # 21 Steamboat Springs, CO 80487 © Copyright 2010 Sensor Solutions	Fax: 970-879-9700 Email Engineering